You will like also
Description
BENCH PRESS WITH WOODEN BASE
This bench press is a professional machine for effortlessly setting snap fasteners, eyelets and rivets with a perfect crimp. You can also punch holes using hole punches for bench presses and a brass anvil.
It is easy to use: simply turn the handle to the right to lower the piston and apply perfect pressure.
Press specifications:
This bench press must be used with the PRESS setting dies (sold separately).
You can also use the PLIER setting dies with adapter Ref. TA826.
The upper die is secured with a 6.2 mm diameter thread
The lower die is placed in a 12.1 mm diameter hole and held in place with a screw
You can also use the PLIER setting dies with adapter Ref. TA826.
| Press |
Overall height |
Base length |
Base width |
Inner recess depth | Inner recess height | Clearance for inserting setting dies | Weight |
| N2 |
27,5 cm | 19 cm | 7,5 cm | 7 cm | 9 cm | 4,3 cm | 3,3 kg |
| N3 |
34 cm | 14 cm | 8 cm | 8 cm | 7 cm | 4,5 cm | 4,2 kg |
| N4 |
29 cm | 23 cm | 7,5 cm | 11 cm | 9 cm | 4,5 cm | 4,2 kg |
| N5 | 31 cm | 26 cm | 8.5 cm | 12 cm | 11 cm | 4.5 cm | 6.2 kg |
The upper die is secured with a 6.2 mm diameter thread
The lower die is placed in a 12.1 mm diameter hole and held in place with a screw
Made in Italy.
New for 2026: The handle of the N3 press is covered with a plastic grip for improved handling.
Wooden base specifications:
This stand has 10 holes for storing 5 sets of setting dies.
This stand has 10 holes for storing 5 sets of setting dies.
To use the press, simply secure it to your table with clamps (not included).
This setup makes your press portable, so you can take it wherever you like!Base dimensions: 300 x 350 mm
Thickness: 32 mm
Thickness: 32 mm
Made of beech wood
Made in France
Made in France
The bench press and base are sold without setting dies
Ordering information: No shipping outside Europe.
Which press should I choose for my needs?
| Use for rivets and eyelets | ||||
| Diameter |
Press N2 | Press N3 | Press N4 | Press N5 |
| Up to 12 mm |
✔ |
✔ | ✔ | ✔ |
| 13 to 15 mm |
⚠ |
✔ | ✔ | ✔ |
| 16 to 20 mm | ✘ |
⚠ |
✔ |
✔ |
| 21 to 25 mm |
✘ |
⚠ |
⚠ | ✔ |
| Over 26 mm |
✘ |
✘ |
✘ | ⚠ |
| Use with hole punches | |||
| Hole diameter | Press N2 - N3 | Press N4 | Press N5 |
| 1 to 10 mm |
✔ |
✔ | ✔ |
| 11 to 15 mm |
⚠ |
✔ | ✔ |
| 16 to 18 mm | ✘ |
⚠ |
✔ |
| 19 to 20 mm |
✘ |
⚠ |
⚠ |
| 21 to 25 mm |
✘ |
✘ |
⚠ |
✔ For all types of leather
⚠ For thin, supple leather
✘ Not recommended
The values above are provided for guidance only and may vary up or down depending on the material of the accessories (brass, iron, stainless steel, aluminum) and the thickness of the leather.
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
