Bench press N3 delivered on its wooden base and 3 installation sets

RED PRESS + 3 DIES

This N3-size manual bench press is a professional machine for effortlessly setting snap fasteners, eyelets and rivets up to 15 mm in diameter with a perfect finish. You can also punch holes using bench press punches up to 10 mm in diameter and a brass anvil.

The values above are provided for information only and may vary depending on the accessory material (brass, iron, stainless steel, aluminium) and the thickness of the leather.
For setting larger accessories or punching larger holes, we recommend the N4-size press.

It is simple to operate: just turn the handle to the right to lower the piston and apply perfect pressure.

Supplied with 3 sets of PRESS dies:
- 12 mm diameter snap fastener
- 5 mm diameter eyelet
- T3 double-cap rivet

Features of the N3 professional setting machine:
Total height: 34 cm
Base: Length: 14 cm - Width: 8 cm
Inner recess dimensions: Depth: 8 cm - Height: 7 cm
Space for inserting the setting dies: 4.5 cm
Total press weight: 4.2 kg
Base dimensions: 300 x 350 mm - Thickness: 32 mm
The top die is secured with a 6.2 mm diameter thread.
The bottom die sits in a 12.1 mm diameter hole and is held in place with a screw.
The handle is covered with a plastic grip for comfortable handling.
Made in Italy.

Features of the wooden base:
This stand has 10 holes for storing up to 5 sets of setting dies.
To use the press, the base must be secured to your table with clamps (not supplied).
Made from beech wood.
Made in France

The bench press with base is sold with the 3 specified sets of setting dies.
You can purchase additional PRESS setting dies separately.
You can also use PLIER setting dies by adding adapter ref. TA826.

Order information: No shipping outside Europe.