Free pattern - Pink October leather keychain - Deco Cuir

Porte-clés en cuir rose DIY pour Octobre Rose

1 comment

Craft this leather keychain to raise awareness for breast cancer screening during the Pink October campaign. Practical for holding your house or car keys, this trendy accessory will go everywhere with you, like a reminder!

Breast cancer is the most common cancer in women. Early detection means a 90% chance of recovery after 5 years. It is therefore important to get screened starting at age 25!

CANCERDUSEIN.ORG >

Download the pattern

This free pattern is for private use only. It is to be printed in real size. Download the PDF pattern

If you have a Cricut Maker, here is the pattern in SVG: Download the SVG pattern

Supplies

Max cost: 10,00 €

The products needed to complete this tutorial

Italie 🟢⚪🔴

Morceau de cuir veau Satinlys Rose, texture lisse et douce, pour créations artisanales ou couture, vue en gros plan.

Morceau de cuir en veau satinlys rose, texture douce et brillante, idéal pour la maroquinerie ou la couture.

SATINLYS leather piece - PINK

From

2,72 €

SIZE: 15x20cm 20x30cm 30x40cm
THICKNESS: 0.5mm 0.8mm 1.2mm

Italie 🟢⚪🔴

Finition de tranche mate Deco Cuir Rose Fuchsia pour teintures et peintures, bouteille de 60ml.

Finition de tranche mate Deco Cuir rose fuchsia, teintures et peintures pour finition élégante de meubles en cuir.

Matte edge finish - Leather decor - Fuchsia pink

From

5,90 €

98,33 € / l

CAPACITY: 60ml 250ml

Gamme suivie Belgique ⚫🟡🔴

Morceau de cuir de collet tannage végétal Sauvage rouge, matériau artisanal pour la maroquinerie ou la création.

Morceau de cuir de collet tannage végétal Sauvage de couleur noisette, portant la texture naturelle du cuir.

Piece of vegetable tanned collar leather SAUVAGE - RED

From

4,60 €

SIZE: 15x20cm 20x30cm 30x40cm
THICKNESS: 1mm 1.4mm 1.9mm

Italie 🟢⚪🔴

Lot de boutons pression en laiton Deco Cuir, diamètre 10,5 mm, accessoires pour cuir et travaux manuels, finition brillante.

Boutons pression en laiton de 10,5 mm de diamètre, accessoires Deco Cuir, montrant leur schéma et leur finition brillante.

Set of brass snaps - Diameter 10.5mm

From

1,96 €

0,39 € / item

FINISHING: Brass Aged silver Gun barrel Aged brass Nickel plated old copper
CONDITIONING: Per 5 Per 100

Kit d'œillets en étoile dorés de 4 mm avec outils de pose, accessoires pour création artisanale.

Kit d'œillets en étoile de 4 mm avec outils de pose, accessoires pour décoration et bricolage, image montrant le kit complet.

Star eyelet kit and installation tools - 4 mm

4,96 €

FINISHING: luxury gold Aged brass Nickel plated Shiny black old copper
DIAMETER: 4mm

Italie 🟢⚪🔴

Anneau rond de porte-clés en nickel, bouclerie robuste pour clés, image montrant la finition lisse et le design circulaire.

Anneau rond de porte-clés nickelé de 18 mm, bouclerie pour clés ou accessoires, image montrant la finition métallique brillante.

Round Keychain Ring - NICKEL PLATED

From

0,05 €

WIDTH: 10mm 14mm 18mm 22mm 25mm

Gamme suivie Italie 🟢⚪🔴

Morceau de cuir de veau lisse rouge vif de la gamme suivie Nappa. Cuir idéal pour la fabrication de portefeuille, porte-cartes, accessoire, décoration, petit objet, test...

Cuir lisse de la gamme suivie Nappa couleur rouge vif. Cuir souple, de 1 mm d'épaisseur idéal pour la fabrication de sac, petite maroquinerie, étui de téléphone...

NAPPA calf leather piece - RED

From

2,72 €

SIZE: 15x20cm 20x30cm 30 x 40 cm
THICKNESS: 0.5mm 1mm

The materials you need

To make this keychain, you will need:

1 piece of semi-soft/semi-firm leather (SATINLYS, SAUVAGE or SATINATO) measuring 15 x 20 cm - 1.2 mm thick
2 snap fasteners Ø 10.5 mm and the setting tool
2 eyelets Ø 4 mm and the setting tool
1 Ø 22 mm
1 round 4 mm punch
1 edge beveler or edge finish

1. Position the pattern

Position the pattern on the grain side of the leather and hold it in place using masking tape.

Cutting out the paper pattern for the original boobs keychain case on a piece of leather Position of the pattern on our leather for creating our pink October boobs keychain case

2. Cut the leather

Next, cut the leather with a craft knife following the outline.

A .svg pattern is available for free download to cut the case with a cutting machine such as the Cricut Maker.

Cutting out the leather boobs keychain

3. Punch the holes

Punch Ø 4 mm holes for the eyelets and snap fasteners.

Punching holes in the paper pattern for the pink October keychain case

4. Set the snap fasteners

Set the two snap fasteners and the two eyelets using the appropriate setting tool.
HOW TO SET A SNAP FASTENER?

Setting the snap fastener on the pink October boobs keychain case

5. Set the snap fasteners

Sand the edges if necessary, then apply a finish.

DIY pink leather edge finish for the pink October keychain

6. Thread the keychain ring

To finish, thread the keychain ring through the two eyelets. Make sure the keys are centered in the case. Be careful not to damage the grain side of the leather when threading the eyelets. Pink October leather boobs keychain Red leather boobs keychain